Installation 
Oven Assembly
END PLUGS
1.Install the upper end plugs on both ends of the oven. See Figure 9. Secure the upper end plugs with two wing nuts on the bottom of each plug.
Figure 9
2.Install the lower end plugs on both ends of the oven. See Figure 10.
Figure 10
CRUMB PANS
1.Install the crumb pans under each end of the conveyor as shown in Figure 11.
Figure 11
REMOTE COMPUTER CONTROL
1.Drill the mounting holes for the cooking com- puter support base.
2.Mount the support base and cable support bracket to the wall.
3.Stack the cooking computer(s) on the support base. Connect the cables at the rear of the controller.
4.Secure the cables to the cable clamp support bracket and to the rear of the oven using cable clamps and screws.
NOTE: DO NOT overtighten the cable clamps. Damage to the wires may oc- cure causing the computer to fail.
Cooking Computer
Cable Clamp
Cooking Computer 
Support Bracket
Support Base
Figure 12
9
