Bosch Appliances instruction manual LTC 8600 LTC 8800 Series

LTC 8600 LTC 8800 Series en 39

Figure 12: Main Site Sample Program Showing Local Cameras, Trunk Lines and Remote Cam-

eras

NOTE Either a local camera, or a remote camera programmed with a local title, will need to be selected to view certain on-screen prompts or data during programming of the main site via a system keyboard.

Once the system is programmed and configured, any unused monitor outputs located at the main site should be selected to display a local camera via the system keyboard. This prevents unused monitor outputs from using up trunk lines which may result in some confusing operational responses.

The “Start-up” camera numbers listed in the Monitor Table of the LTC 8059/00 soft- ware should be programmed to specify locally connected cameras or a local unused input (i.e., the raster generator will be displayed when called up). This table defines the camera numbers that will automatically be switched to an operator's monitor in the event the trunk line being used to display their original satellite camera is 'sto- len' by an operator with a higher priority.

Figure 13: Main Site Sample Program Showing Monitor Start-Up Camera Numbers

F.01U.127.393 2.0 2009.03 Instruction Manual Bosch Security Systems, Inc.