LTC 8600 LTC 8800 Series | en 73 |
|
|
User Function 1 - Local Keyboard Test
User Function 1 can be used as a local test to ensure that all the keyboard LEDs and switches are working. This function automatically calibrates the center position of the analog joystick on LTC 8555 keyboards. Upon entering this test, the keyboard will beep and all LEDs will light for about two (2) seconds. The USER should note if there are any LED failures.
Each key may be pressed to display a unique code number associated with that key.
Follow the table below to ensure that all keys are properly being processed by the keyboard. Push [USER] last, as this causes the keyboard to exit the test mode. If the
Key | No. |
IRIS UP | 044 |
IRIS DOWN | 045 |
FOCUS UP | 042 |
FOCUS DOWN | 043 |
ZOOM CLOCKWISE1 | 041 |
ZOOM COUNTERCLOCKWISE1 | 040 |
ALARM | 004 |
USER | 000 |
SEQUENCE | 032 |
HOLD | 036 |
RUN | 033 |
PREVIOUS | 035 |
NEXT | 034 |
#1 | 010 |
#2 | 018 |
#3 | 026 |
#4 | 011 |
#5 | 019 |
#6 | 027 |
CAMERA | 024 |
MONITOR | 008 |
ACKNOWLEDGE | 005 |
PROGRAM | 002 |
SET | 001 |
SHOT | 009 |
OFF | 025 |
ON | 017 |
* (STAR) | 016 |
LOCK | 003 |
#7 | 012 |
#8 | 020 |
#9 | 028 |
CLEAR | 037 |
#0 | 013 |
ENTER | 029 |
UP1 | 052 |
RIGHT1 | 051 |
DOWN1 | 050 |
LEFT1 | 053 |
1Keyboard tests show a speed indicator value in the first digit position when per- forming pan, tilt, or zoom actions.
F.01U.127.393 2.0 2009.03 | Instruction Manual | Bosch Security Systems, Inc. |
