Bosch Appliances LTC 8600, LTC 8800 instruction manual Camera, Monitor, Dwell

70 en LTC 8600 LTC 8800 Series

17.7.2 Programming a SalvoSwitching Camera Sequence

A SalvoSwitching sequence can be used to switch a group of monitors simultane- ously as a synchronized group. To program a Salvo sequence, enter the program- ming mode as described above for a simple camera sequence. By definition, Salvo sequencing involves more than one monitor. An example of a simple Salvo sequence that switches cameras on three (3) monitors simultaneously is shown below:

CAMERA	MONITOR	DWELL
1	1	SLV
2	2	SLV
3	3	2
7	1	SLV
8	2	SLV
9	3	2
21	1	SLV
22	3	SLV
23	3	2

In general, follow the instructions used for the simple camera sequence (described

above), but instead of entering a number of seconds for steps that must switch instantly, enter 61 and press [Enter]. This causes the switcher to automatically

change to the salvo abbreviation SLV. Dwell time (in seconds) is entered only when you reach the step containing the last monitor that will be switched within the syn- chronized group.

Bosch Security Systems, Inc. Instruction Manual F.01U.127.393 2.0 2009.03