System Control Panel

Compare this 60 kW control panel illustration with your generator to familiarize yourself with the location of these important controls:

B F

C

D

E

A

A - Circuit Breaker — Protects the system om shorts

E – 15 Amp Fuse — Protects the home generator DC

A

and other over-current conditions. Must be

to

control circuits. If the fuse has ‘blown’ (melted open)

 

 

supply power to the automatic trans er switch.

 

or was removed, the engine cannot crank or start.

 

 

for

 

Replace the fuse using only an identical ATO 15A

B - Menu/Programming Navigation Buttons — See

fuse. One spare fuse is supplied with the unit.

 

Menu section for details

 

 

 

 

 

F - Digital Display — Displays generator mode, menu

C

 

 

 

C - USB Port — Authorized Dealer Service Use Only

 

D

 

REPRODUCTION

 

 

 

options, service codes, and service engine indicators

D - Generator Operation Control Buttons —

 

 

•“AUTO” Normal operating position. Press and hold button to put unit into Automatic mode. If an utility power outage is sensed, the system will start the generator. When utility power is restored, auto lets the engine stabilize internal temperatures, shuts off the generator, and waits for the next utility outage.

•“OFF” Turns off running generator, prevents unit from starting, and resets any detected faults.

OFF must be pressed and held for more than 5 seconds in order to reset service codes.

•“MANUAL” Used to manually start the generator.

“AUTO” LED — LED will light when unit is placed into Auto mode. LED will blink if exercise cycle is not set or set to OFF.

11