• Inspect air cleaner element according to the recommended maintenance schedule found in this section.
• Check fuel lines for cracking, splitting, or chaffing, Replace if any of these conditions exist.
• Check for leaks at the throttle body and intake manifold.
•Leaks at all fittings.
•Ensure the venturi and throttle body are securely mounted.
When inspecting the exhaust system, check for the following | • Inpect oxygen sensor eletrical connector to ensure | |
items: | ||
connector is seated and locked, check wires to ensure | ||
| ||
• Inspect exhaust manifold at the cylinder head for leaks | there is no cracking, splitting, chaffing, or burning. | |
and that all retaining bolts and shields (if used) are in | Replace as necessary. | |
place. | • Inspect exhaust pipe connection for leaks. Repair as | |
| ||
• Inspect manifold to exhaust pipe fasteners to ensure | necessary. | |
they are tight and that there are not exhaust leaks. |
| |
Repair as necessary. |
|
Periodically inspect the engine exterior for contamination and potential damge from dirt, leaves, rodents, spider webs, insects, etc. and remove.
When Calling for Assistance |
|
| ||
| NOT |
|
| |
You must have the following informati n at hand if it is | 1. Obtain the unit Model Number and Serial Number | |||
from the unit ID label. See Features and Controls | ||||
necessary to contact a local service center regarding | ||||
for location of the label or refer to the information | ||||
service or repair of this unit: | for |
| ||
|
| recorded on the inside front cover of the | ||
|
|
| ||
|
|
| installation manual. | |
|
| REPRODUCTION | ||
|
|
| 2. Obtain the engine identification numbers from the | |
engine label.
Storage
The generator is designed for long term service as a backup generator. There is no need to take any storage precautions. However, if it becomes necessary to take the system out of service for an extended period, call Technical Services at 888
24