Brother DCP1200 manual Parallel Interface, USB Universal Serial Bus Interface, Pin Assignment

Interface

Parallel Interface

Interface Connector				Printer Side:		Amphenol FCN-685J036-L/X or equivalent
						A shielded cable should be used.
Pin Assignment
Pin No.			Signal		Direction	Pin No.		Signal	Direction
1	DATA STROBE				Input	19	0V(S.G.)		-
2			DATA 1		Input	20	0V(S.G.)		-
3			DATA 2		Input	21	0V(S.G.)		-
4			DATA 3		Input	22	0V(S.G.)		-
5			DATA 4		Input	23	0V(S.G.)		-
6			DATA 5		Input	24	0V(S.G.)		-
7			DATA 6		Input	25	0V(S.G.)		-
8			DATA 7		Input	26	0V(S.G.)		-
9			DATA 8		Input	27	0V(S.G.)		-
10		ACKNLG			Output	28	0V(S.G.)		-
11			BUSY		Output	29	0V(S.G.)		-
12			PE		Output	30	0V(S.G.)		-
13			SLCT		Output	31	INPUT PRIME		Input
14	AUTO FEED				Input	32		FAULT	Output
15			N.C.		-	33		N.C.	-
16			0V (S.G.)		-	34		N.C.	-
17			0V (S.G.)		-	35		N.C.	-
18			+5V		-	36	SLCT IN		Input

USB (Universal Serial Bus) Interface

Pin Assignment

Pin No.	Signal
1	Vol (+5V)
2	- Data	Serial Data -
3	+ Data	Serial Data +
4	Ground

S P E C I F I C A T I O N S 12 - 5