Computer Requirements
The following are the minimum computer requirements you need to set up and operate the MFC as a printer.
CPU | 80486/66MHz or higher (Windows® 3.1x or 95) |
| Pentium 75 or Higher (Windows® 98 or |
| Windows NT® Workstation Version 4.0) |
RAM | 8MB or greater for Windows® 3.1x |
| 8MB or greater for Windows® 95 |
| (16MB recommended) |
| 16MB or greater for Windows® 98 or Windows NT® |
| Workstation Version 4.0 (32MB recommended) |
Hard Disk Drive | 50MB Available Disk Space |
Operating System | Windows® 3.1x, 95/98 or NT® Workstation Version |
| 4.0, DOS environment compatible with your |
| Windows® version |
Use only a shield interface cable that is
Connections
Connecting a USB Cable (For Windows® 98,
Please find your Windows® 98
A USB cable is not included with your copier/printer. Before you can set up the USB interface, you must purchase a standard USB cable. Or, if you prefer to set up the bundled parallel cable, please see “Connecting the Bundled Parallel Cable”.
1After you have set up the copier/printer and checked that it is working properly, make sure it is turned on and your PC is turned off.
4 - 2 | C O N N E C T I N G T O A P C |