Printing PC Data in Hexadecimal
1Press Menu until you see 3.RESET PRINTER.
2Press 3 on the numeric keys to select it.
3 Press Menu until you see | 2.HEX DUMP MODE | |
2.HEX DUMP MODE. | 100% | |
4 Press 2 | on the numeric keys to | 1.SET 2.EXIT |
select it. |
| 100% |
5 Press 1 | to print a hexadecimal dump of |
|
the PC data.—
Printing from DOS
How to Use the Copier/Printer with Your DOS Application Software
Before working with your application software that runs on DOS, check that the Brother machine’s name appears in the printer selection of your application software. If the machine is not listed, you must select the printer that corresponds to HP LaserJet IIP’s emulations.
The following table shows combinations of printer drivers and emulation mode. To get the most out of this machine, you should install an HP printer driver in your application software.
Printer driver supported in | Emulation mode to be selected with |
your application software | the remote printer console program |
|
|
HP LaserJet IIP™ | HP LaserJet IIP emulation mode |
HP LaserJet II™ | Auto emulation selection |
■The best or recommended printer driver is indicated in bold.
■Be sure to choose the proper printer driver in your application software.
■Be sure the printing resolution is set to 300 dpi in your DOS application software.
What Does the Remote Printer Console Do?
The Remote Printer Console (RPC) is a utility program that can run in the DOS environment and comprises the following two programs:
P R I N T I N G | 5 - 11 |