Brother DCP1200 manual Choose one of the following Paper Source options

5Choose one of the following Paper Source options:

1.Select Dual to switch automatically to the other cassette when the paper runs out.

2.Select Upper Paper Cassette to use only the paper in Cassette #1.

3.Select Lower Paper Cassette to use only the paper in Cassette #2.

4.Select Manual to feed the paper one sheet at a time in the Manual Feed Slot.

6For the best print quality, select the type of media you will be using:

∙ Select Regular if you are using ordinary plain paper.

∙ Select Thin Paper if the paper wrinkles when you are using thin paper.

∙ Select Thick Paper or Thicker Paper if you are using bond paper, envelopes, rough paper or thicker paper.

∙ Select Thicker Paper if the toner comes off when printing with the Thick Paper setting.

∙ Select Transparency when you print with OHP transparencies.

7Check the Economy box to print in economy mode. You can save up to 50% of toner consumption using this feature.

8Select Gray Scale if your document contains graphics, especially halftone images. Uncheck this box if your document is text only and you want to print quickly.

The Print options listed in the bottom part of the dialog box will vary according to the software application from which you are printing.

To print on both sides of the paper, click the Options button. The Options Setup dialog box appears:

9Select Manual Duplex to print on both sides of the paper. Insert the paper in the cassette to print the even numbered pages. You will be instructed when to re-insert the paper. Turn the paper over and re-insert it to print the odd numbered pages.

5 - 8 P R I N T I N G