Brother FAX 580MC owner manual Memory TXON?, Press Function/Set, 3

Press Start.

Manual and Automatic Fax Redial

If you’re sending a fax manually and the line is busy, press Redial/Pause to retry the number.

If you’re sending a fax automatically and the line is busy, the FAX/MFC will redial automatically up to three times at 5 minute intervals.

Memory Transmission

This feature allows your machine to scan a fax into its memory and send it as soon as the scan is complete. This way, you don’t have to wait for the entire fax to be transmitted before you retrieve your original.

Place the original face down in the ADF.

3

Automatic Transmission

This is the easiest way to send a fax.

IMPORTANT: Do not pick up the handset, or press Speaker Phone.

1 Place the original face down in the ADF.

2 Enter the fax number using One Touch, Speed Dial, Search or the dial pad. (See One Touch Dialing, Speed Dialing and Search, page 7-4to 7-6.)

When you hear the fax tone, press Start. If you’re using the handset, hang up.

4

5

3 Enter the fax number you want to call. (You can enter the digits using the dial pad, or you can enter a One Touch or Speed Dial number or you can call using Search/Speed Dial.) (See One Touch Dialing, page 7-4and Search, page 7-6.)

Place the original face down in the ADF.

Pick up the handset and listen for a dial tone

— OR—pressSpeaker Phone and listen for a dial tone.

1

2

Manual Transmission

Manual transmission lets you hear the dial tone, ringing and fax receiving tones before sending the fax.

1

2	Press Function/Set, 3, 9.			9.MEMORY TX
3	To change the default setting, press		or	MEMORY TX:ON?
	to select ON (or OFF) and press			SELECT <- >- & SET
	Function/Set. Go to Step 5— OR—For the
	next fax transmission only, press		or	to
	select NEXT FAX ONLY and press Function/Set.
4	For the next fax only, press	or	to select ON (or OFF) and
	press Function/Set.
6 - 2	S E T U P S E N D