Brother FAX 580MC Transmission Verification Xmit Report, Activity Report Interval, Interval?

Transmission Verification (Xmit) Report

1

2

3

You can use the Xmit Report as proof that you sent a fax. This report lists the name or fax number of the receiving party, the time and date of transmission, and whether the transmission was successful.

When the feature is OFF, the report is printed automatically only if there’s an error during transmission. If the report indicates NG, send the original again. If the report indicates you should check the readability of certain pages, resend those pages.

When the feature is ON, the report is printed with every fax you send.

Press Function/Set, 7, 1.

Press or to select ON (or OFF) and press Function/Set.

Press Stop to exit.

Activity Report Interval

You can set the FAX/MFC to print activity reports at specific intervals (6, 12, 24 hours, 2, 4 or 7 days). If you set the interval to OFF, you can print the report by following the steps in the previous section.

1

2

Press Function/Set, 7, 2.
Press	or	to display:	INTERVAL?

and press Function/Set.

3 Press or to choose your setting and

press Function/Set. If you choose 7 days, the screen prompts you to choose a day at which to begin the 7-day countdown.

4 Enter the time, in 24-hour format, that printing will begin and press Function/Set. (For example, enter 19:45 for 7:45 PM)

5 Press Stop to exit.

11 - 2 P R I N T I N G R E P O R T S