Advanced Receiving Operations
Operation from External or Extension Telephone
If you answer a fax call on an extension phone or on an external phone in the EXT. jack, you can make your FAX/MFC take over by using the Fax Receive Code. When you press the Fax Receive Code 
5 1, the FAX/MFC starts to receive a fax. (See Easy Receive, page
If the FAX/MFC answers a voice call and
If you answer a call, and no one is on the line, assume you’re receiving a fax. At the FAX/MFC phone, press Start, then hang up. At an extension phone, press 
5 1, wait for fax receiving tones (chirps), then hang up. At an external phone, press 
5 1 and wait for the phone to be disconnected (the screen displays RECEIVE) before you hang up. (Your caller will have to press Start to send the fax.)
For FAX/TEL Mode Only
When the FAX/MFC is in FAX/TEL mode, it will use the F/T Ring Time (double ringing) to alert you to a voice call. If you’re at the FAX/MFC, you can lift the handset to answer.
If you’re at an extension phone, you’ll need to lift the handset during the F/T Ring Time and press # 5 1 between the double rings. If no one is on the line, or if someone wants to send you a fax, send the call back to the FAX/MFC by pressing 
5 1.
Changing Remote Codes
1
Remote Codes might not work with some telephone systems. The preset Fax Receive Code is 
5 1. The preset Telephone Answer Code is # 5 1.
If you are always disconnected when accessing your external TAD remotely, try changing the Fax Receive Code from 
5 1 to # # # and the Telephone Answer Code from # 5 1 to 9 9 9.
Press Function/Set, 2 , 4 .
2
3
4
Press 
or 
to select ON (or OFF) and press
Function/Set.
If you want to, enter a new Fax Receive Code, then press Function/Set.
If you want to, enter a new Telephone Answer Code, then press Function/Set.
REMOTE ACT.:ON?
FAX RECEIVE:*51
TEL ANSWER:#51
5 Press Stop to exit.
S E T U P R E C E I V E | 5 - 6 |
