Chapter 11
100
Tray Select 11
You can change the tray that will be used for
next copy only. To change the default tray
see Tray use in Copy mode on page 27.
aMake sure you are in Copy mode.
bLoad your document.
cEnter the number of copies you want.
dPress aor b to choose Tray Select.
e
Press
d
or
c
to choose
Tray#1
or
Tray#2
.
Press OK.
fIf you do not want to change additional
settings, press Black Start or
Color Start.
Skew Adjustment 11
If your copy is scanned skewed, your
machine can correct the data automatically.
This setting is only available when using the
scanner glass.
aPress (Copy).
bLoad your document.
cEnter the number of copies you want.
d
Press
a
or
b
to choose
Skew Adjustment
.
ePress dor c to choose Auto (or Off).
Press OK.
f
If you do not want to change additional
settings, press
Black Start
or
Color Start
.
Note
•Skew Adjustment is not available with
Poster, 1to2, Book Copy and
Watermark Copy.
• You cannot use this setting with Ledger,
A3 or paper that is smaller than
2.52 in. ×3.58 in. (64 mm ×91 mm).
• This setting is only available for paper that
is rectangular or square.
• You cannot use this setting with a thick
document, such as a book.
• Skew Adjustment is only available if the
document is skewed by less than 3
degrees.
Book Copy 11
Book copy corrects dark borders and skew
when copying from the scanner glass. Your
machine can correct the data automatically or
you can make specific corrections.
aPress (Copy).
bLoad your document.
cEnter the number of copies you want.
dPress aor b to choose Book Copy.
eDo one of the following:
If you want to correct the data
yourself, press dor c to choose
On(Preview).
Press OK.
Press Black Start or Color Start
and go to step f.
If you want the machine to correct
the data automatically, press dor c
to choose On and go to step g.
fAdjust the skewed data using #or l.
Remove the shadows by using aor b.
gIf you have finished making corrections,
press Black Start or Color Start.