PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive
111
12
fAfter you have chosen all the image
numbers, press OK again.
gEnter the number of copies you want
using the dial pad.
hDo one of the following:
Change the print settings. (See
page 117.)
If you do not want to change any
settings, press Color Start to print.
Enhance Photos 12
You can edit and add effects to your photos
and view them on the LCD before printing.
Note
After adding each effect, you can enlarge
the view of the image by pressing l. To go
back to the original size, press l again.
The Enhance Photos feature is supported
by technology from Reallusion,
Inc.
Auto Correct 12
Auto Correct is available for most photos. The
machine decides the suitable effect for your
photo.
aMake sure you have put a memory card
or USB Flash memory drive in the
proper slot.
Press (Photo Capture).
bPress aor b to choose
Enhance Photos.
Press OK.
cPress dor c to choose your photo.
Press OK.
dPress aor b to choose Auto Correct.
Press OK.
ePress OK and aor b to increase or
decrease the number of copies.
fDo one of the following.
Press OK and change the print
settings. (See page 117.)
If you do not want to change any
settings, press Color Start to print.
Note
If Remove Red-Eye appears on the LCD,
press # to remove red-eye from your
photo.