Chapter 11
102
Using a scanned paper document as
your watermark 11
aPress (Copy).
bEnter the number of copies you want.
cPress aor b to choose
Watermark Copy.
Press OK.
dPress dor c to choose On.
ePress aor b to choose
Current Setting.
Press OK.
fPress aor b to choose Scan. Press OK.
Then place the page that you want to
use for the watermark on the scanner
glass.
gPress Black Start or Color Start.
hTake out the watermark document you
scanned and load the document you
want to copy.
iPress dor c to change the
Transparency of the watermark.
Press OK.
jIf you do not want to change any
additional settings, press Black Start or
Color Start.
Note
You cannot enlarge or reduce the
scanned watermark.
Setting your changes as the
new default 11
You can save the copy settings for Quality,
Enlarge/Reduce, Tray Select,
Brightness, Contrast, Page Layout or
Skew Adjustment that you use most often
by setting them the default settings. These
settings will stay until you change them again.
aPress (Copy).
bPress aor b to choose your new setting.
Press OK.
Repeat this step for each setting you
want to change.
cAfter changing the last setting, press
aor b to choose Set New Default.
Press OK.
dPress 1 to choose Yes.
ePress Stop/Exit.
Restoring all settings to the
factory settings 11
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
aPress (Copy).
bPress aor b to choose
Factory Reset.
Press OK.
cPress 1 to choose Yes.
dPress Stop/Exit.