Troubleshooting and Routine Maintenance
161
B
eClose the Inner Back Cover (1) if it is
open as shown in the illustration.
fClose the Outer Back Cover.
Make sure the Outer Back Cover is
closed properly.
gUsing both hands, use the plastic tabs
on both sides of the machine to lift the
Scanner Cover (1) into the open
position.
Make sure that there is no jammed
paper left in the corners of the machine
under the plastic covers.
Note
• If the paper is jammed under the print
head, unplug the machine from the power
source, and then move the print head to
take out the paper.
•
If the print head has stopped in the right
corner as shown in the illustration, you
cannot move the print head. Press
Stop/Exit
until the print head moves to the
middle.
Then unplug the machine from the
power source, and take out the paper.
• If ink gets on your skin or clothing
immediately wash it off with soap or
detergent.
hGently close the scanner cover using
the finger holds on both sides of it as you
push down on the Scanner Cover
Support (1).
1
1
1