Making copies
95
11
Copy settings 11
You can change the copy settings temporarily
for the next copy.
These settings are temporary, and the
machine returns to its default settings
1 minute after copying, unless you have set
the Mode Timer to 30 seconds or less. (See
Mode Timer on page 26.)
If you have finished choosing settings, press
Black Start or Color Start.
If you want to choose more settings, press
aor b.
Note
You can save some of the settings that
you use most often by setting them as
default. These settings will stay until you
change them again. (See Setting your
changes as the new default on page 102.)
Changing copy quality 11
You can choose from a range of quality. The
factory setting is Normal.
Fast
Fast copy speed and lowest amount of ink
used. Use to save time printing
documents to be proof-read, large
documents or many copies.
Normal
Normal is the recommended mode for
ordinary printouts. This produces good
copy quality with good copy speed.
Best
Use best mode to copy precise images
such as photographs. This provides the
highest resolution and slowest speed.
aPress (Copy).
bLoad your document.
cEnter the number of copies you want.
dPress aor b to choose Quality.
ePress dor c to choose Fast, Normal or
Best.
Press OK.
fIf you do not want to change additional
settings, press Black Start or
Color Start.

Enlarging or reducing the

image copied 11
You can choose an enlargement or reduction
ratio. If you choose Fit to Page, your
machine will adjust the size automatically to
the paper size you set.
aPress (Copy).
bLoad your document.
cEnter the number of copies you want.
dPress aor b to choose
Enlarge/Reduce.
ePress dor c to choose Enlarge,
Reduce, FittoPage or
Custom(25-400%).
Press OK.
fDo one of the following:
If you chose Enlarge or Reduce,
press OK and press dor c to choose
the enlargement or reduction ratio
you want.
If you chose Custom(25-400%),
press OK and then enter an
enlargement or reduction ratio from
25% to 400%.
If you chose 100% or Fit to Page,
go to step g.