Troubleshooting and Routine Maintenance
171
B
CAUTION
If you are not able to find the light-green
protective part, DO NOT remove the ink
cartridges before shipping. It is essential
that the machine be shipped with either the
light-green protective part or the ink
cartridges in position. Shipping without
them will cause damage to your machine
and may void your warranty.
dUnplug the machine from the telephone
wall jack and take the telephone line
cord out of the machine.
eUnplug the machine from the AC power
outlet.
fUsing both hands, use the plastic tabs
on both sides of the machine to lift the
scanner cover into the open position.
Then unplug the interface cable from the
machine, if it is connected.
gGently close the scanner cover using
the finger holds on both sides of it as you
push down on the Scanner Cover
Support (1).
WARNING
Be careful not to trap your fingers under the
scanner cover.
Always use the finger holds provided on
both sides of the scanner cover when
opening and closing it.
hWrap the machine in the bag and put it
in the original carton with the original
packing material.

i

Pack the printed materials in the original
carton as shown in the illustration. Do not
pack the used ink cartridges in the carton.
Note
If you are returning your machine to
Brother as part of the Exchange Service,
pack only the machine. Keep all separate
parts and printed materials to use with
your ‘Exchange’ machine.
jClose the carton and tape it shut.
1