Brother MFC-6490CW Broadcasting (Black & White o nly)

Sending a Fax
43
5
Broadcasting
(Black & White only) 5
Broadcasting is when the same fax message
is automatically sent to more than one fax
number. You can include Groups, One Touch,
Speed Dial numbers and up to 50 manually
dialed numbers in the same broadcast.
After the broadcast is finished, a Broadcast
Report will be printed.
aPress (Fax).
bLoad your document.
cPress aor b to choose Broadcasting.
Press OK.
dYou can add numbers to the broadcast
in the following ways:
Press aor b to choose Add Number
and enter the number using a dial
pad.
Press OK.
Press aor b to choose Phone Book
and OK. Press aor b to choose
Alphabetical Order or
Numerical Order and OK. Press
aor b to select a number and OK.
Note
One Touch Dial locations begin with l.
Speed Dial locations begin with #.
eAfter you have entered all the fax
numbers by repeating step d, press
aor b to choose Complete.
Press OK.
fPress Black Start.
Note
• If you have not used up any of the numbers
for Groups, you can broadcast up to 256
different numbers.
• The available memory will vary depending
on the types of jobs in the memory and the
number of locations used for broadcasting.
If you broadcast to the maximum numbers
available, you will not be able to use dual
access and delayed fax.
• If the memory is full, press Stop/Exit to
stop the job. If more than one page has
been scanned, press Black Start to send
the portion that is in the memory.