General setup
29
3
Volume Settings 3
Ring Volume 3
You can choose a range of ring volume
levels, from High to Off.
While the machine is idle, press dor c
to adjust the volume level. The LCD shows
the current setting, and each key press will
change the volume to the next level. The
machine will keep the new setting until you
change it.You can also change the volume
through the menu, by following the
instructions below:
Setting the Ring Volume from the
menu 3
aPress Menu.
bPress aor b to choose
General Setup.
Press OK.
cPress aor b to choose Volume.
Press OK.
dPress aor b to choose Ring.
ePress dor c to choose Low, Med, High
or Off.
Press OK.
fPress Stop/Exit.
Beeper Volume 3
When the beeper is on, the machine will beep
when you press a key, make a mistake or
after you send or receive a fax.
You can choose a range of volume levels,
from High to Off.
aPress Menu.
bPress aor b to choose
General Setup.
Press OK.
cPress aor b to choose Volume.
Press OK.
dPress aor b to choose Beeper.
ePress dor c to choose Low, Med, High
or Off.
Press OK.
fPress Stop/Exit.