Brother MFC-6490CW Paper set ting s

General setup
27
3
Paper settings 3
Paper Size and Type 3
To get the best print quality, set the machine
for the type of paper you are using.
You can use seven sizes of paper for printing
and copying: Ledger, Letter, Legal, A3, A4,
A5 and 4 ×6in. (10×15 cm) and five sizes
for printing faxes: Ledger, Letter, Legal, A3 or
A4. When you load a different size of paper in
the machine, you will need to change the
paper size setting at the same time so your
machine can fit an incoming fax on the page.
aPress Menu.
bPress aor b to chose General Setup.
Press OK.
cPress aor b to chose Tray Setting.
Press OK.
dPress aor b to choose Tray#1 or
Tray#2.
Press OK.
eDo one of the following:
If you chose Tray#1, press dor c to
choose Plain Paper,
Inkjet Paper, Brother BP71,
Other Glossy or
Transparency.
Press OK.
Press aor b to choose Paper Size
and press dor c to choose Letter,
Legal, Ledger, A4, A5, A3 or
4"x6".
Press OK.
If you chose Tray#2, press aor b to
choose Paper Size and press
dor c to choose Letter, Legal,
Ledger, A4 or A3.
Press OK.
fPress Stop/Exit.
Note
• You can only use plain paper sizes
Ledger, Letter, Legal, A3 or A4 in Tray #2.
• The machine ejects paper with printed
surfaces face up onto the paper tray in
front of the machine. When you use
transparencies or glossy paper, remove
each sheet at once to prevent smudging
or paper jams.
Tray use in Copy mode 3
You can change the default tray the machine
will use for printing copies.
To change the default setting follow the
instructions below:
aPress Menu.
bPress aor b to choose
General Setup.
Press OK.
cPress aor b to choose Tray Setting.
Press OK.
dPress aor b to choose
Tray Use:Copy.
ePress dor c to choose Tray#1 or
Tray#2.
Press OK.
fPress Stop/Exit.
Note
You can change the paper size and tray
selection temporarily for the next copy.
(See Paper Size on page 99 and Tray
Select on page 100.)