Sending a Fax
47
5
Delayed Batch Transmission
(Black & White only) 5
Before sending the delayed faxes, your
machine will help you economize by sorting
all the faxes in the memory by destination and
scheduled time. All delayed faxes that are
scheduled to be sent at the same time to the
same fax number will be sent as one fax to
save transmission time.
aPress (Fax).
bPress aor b to choose Batch TX.
cPress dor c to choose On.
Press OK.
dPress Stop/Exit.
Checking and canceling
waiting jobs 5
You can check which jobs are still waiting in
the memory to be sent and cancel a job. (If
there are no jobs, the LCD shows
No Jobs Waiting.)
aPress Menu.
bPress aor b to choose Fax.
Press OK.
cPress aor b to choose
Remaining Jobs.
Press OK.
Any waiting jobs appear on the LCD.
dPress aor b to scroll through the jobs
and choose the job you want to cancel.
Press OK.
eDo one of the following:
To cancel, press 1 to choose Yes.
If you want to cancel another job go
to step d.
To exit without canceling, press 2 to
choose No.
fWhen you have finished, press
Stop/Exit.
Setting your changes as the
new default 5
You can save the fax settings for
Fax Resolution, Contrast,
Glass ScanSize and Real Time TX you
use most often by setting them as default.
These settings will stay until you change
them again.
aPress (Fax).
bPress aor b to choose the menu setting
you want to change, and then press
dor c to choose the new option.
Press OK.
Repeat this step for each setting you
want to change.
cAfter changing the last setting, press
aor b to choose Set New Default.
Press OK.
dPress 1 to choose Yes.
ePress Stop/Exit.
Restoring all settings to the
factory settings 5
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
aPress (Fax).
bPress aor b to choose
Factory Reset.
Press OK.
cPress 1 to choose Yes.
dPress Stop/Exit.