PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive
113
12
Remove Red-Eye 12
The machine detects eyes in your photos and
will remove red-eye from your photo.
Note
There are some cases when red-eye may
not be removed.
When the face is too small.
When the face is turned too far up,
down, left or right.
aMake sure you have put a memory card
or USB Flash memory drive in the
proper slot.
Press (Photo Capture).
bPress aor b to choose
Enhance Photos.
Press OK.
cPress dor c to choose your photo.
Press OK.
dPress aor b to choose
Remove Red-Eye.
Press OK.
When Remove Red-Eye is
successful, the photo after effect is
shown. The adjusted part is shown in
a red frame.
When Remove Red-Eye is
unsuccessful,
Unable to Detect. is shown.
Press 3 to go back to the previous
level.
Note
Press # to try Remove Red-Eye once
again.
ePress OK and aor b to increase or
decrease the number of copies.
fDo one of the following.
Press OK and change the print
settings. (See page 117.)
If you do not want to change any
settings, press Color Start to print.
Monochrome 12
You can convert your photo to black & white.
aMake sure you have put a memory card
or USB Flash memory drive in the
proper slot.
Press (Photo Capture).
bPress aor b to choose
Enhance Photos.
Press OK.
cPress dor c to choose your photo.
Press OK.
dPress aor b to choose Monochrome.
Press OK.
ePress OK and aor b to increase or
decrease the number of copies.
fDo one of the following.
Press OK and change the print
settings. (See page 117.)
If you do not want to change any
settings, press Color Start to print.