Troubleshooting and Routine Maintenance
163
B
cOpen the new ink cartridge bag for the
color shown on the LCD, and then take
out the ink cartridge.
dTurn the green knob on the protective
yellow cap clockwise to release the
vaccum seal, then remove the cap (1).
eEach color has its own correct position.
Insert the ink cartridge in the direction of
the arrow on the label.
fGently push the ink cartridge in until it
clicks, and then close the ink cartridge
cover.
gThe machine will automatically reset the
ink dot counter.
Note
• If you replaced an ink cartridge, the LCD
will ask you to verify that it was a brand
new one. (For example,
Did You Change Black) For each
new cartridge you installed, press 1(Yes)
to automatically reset the ink dot counter
for that color. If the ink cartridge you
installed is not a brand new one, be sure
to press 2 (No).
• If the LCD shows No Cartridge after
you install the ink cartridges, check that
the ink cartridges are installed properly.
WARNING
If ink gets in your eyes, wash them out with
water at once and call a doctor if you are
concerned.
YC
BK
1
YC
BK