Chapter 4
34
Changing the password 4
aPress Menu.
bPress aor b to choose
General Setup.
Press OK.
cPress aor b to choose
Function Lock.
Press OK.
dPress aor b to choose Set Password.
Press OK.
eEnter the registered four-digit password.
Press OK.
fEnter a four-digit number for the new
password.
Press OK.
gWhen the LCD shows Verify:,
re-enter the new password.
Press OK.
hPress Stop/Exit.
Setting up and changing the
Public user 4
You can set up the Public user. Public users
do not need to enter a password. You can set
up one Public user.
aPress Menu.
bPress aor b to choose
General Setup.
Press OK.
cPress aor b to choose
Function Lock.
Press OK.
dPress aor b to choose Setup User.
Press OK.
eEnter the administrator password.
Press OK.
fPress aor b to choose Public.
Press OK.
gDo one of the following:
To set up the Public user, press
dor c to choose Enable or
Disable for Fax Tx. After you
have set Fax Tx, press aor b to
choose the settings for Fax Rx,
Copy(Color), Copy(B&W), Scan,
Print and PCC by repeating this
step.
Press OK.
To change the Public user settings,
press aor b to choose the setting
you want to change.
Press dor c to choose Enable or
Disable.
Repeat this step until you finish
changing settings.
Press OK.
Note
You can set PC Print and PhotoCapture
Print for only the Public user. If you disable
PC Print and PhotoCapture Print for the
Public user it will also disable PC Print and
PhotoCapture Print for all restricted users.
hPress Stop/Exit.