Changing a 2-sided fax layout

You need to choose the duplex scanning format before you send a fax. The format you choose will depend on the layout of your 2-sided document.

a Press Menu, 1, 9, 3.

b Do one of the following:

„If your document is flipped on the Long edge, press a or b to choose

Long edge. Press OK.

Long edge

Portrait Landscape

„If your document is flipped on the Short edge, press a or b to choose

Short edge. Press OK.

Short edge

Portrait Landscape

c Press Stop/Exit.

Sending a fax

Sending a fax from the scanner glass

You can use the scanner glass to fax the pages of a book, or a single page at a time. The documents can be Letter or A4 size. Press Stop/Exit to cancel a fax in progress.

a Make sure you are in Fax mode .

b Place your document face down on the scanner glass.

c Dial the fax number. (See How to dial

5

on page 62.)

d Press Start.

The machine starts scanning the first page.

e After the machine scans the page, the LCD will prompt you to choose one of the options below:

Next Page?

1.Yes 2.No(Send)

„Press 1 to send another page. Go to step f.

„Press 2 or Start to send the document. Go to step g.

f Place the next page on the scanner glass, press OK. Repeat steps e and f for each additional page.

Set Next Page

Then Press OK

g Your machine will automatically send the fax.

Note

When faxing multiple pages from the scanner glass, real time transmission should be set to Off. (See Real Time Transmission on page 42.)

37