Screen-saver Mode

The LCD goes out if the machine is not operated for about five minutes*.

* You cannot change the wait time before the LCD goes out.

Note

When you want to restore the display, perform a print operation or press any button except for the

ON/OFF button. When you press the ON/OFF button while the machine is in Screen-saver mode, the machine turns off.

Handling the Original Document

This section describes how to load the original document on the Platen Glass.

Original Document Requirements

The original documents you load on the Platen Glass for copying or scanning must meet these requirements:

Document type

Paper documents

 

Photographs

 

Books

Size (W x L)Max. 8.5 x 11.7 inches / 216 x 297 mm

Thickness

Max. 0.6 inches / 15 mm

Loading Original Documents

Load originals to copy or scan on the Platen Glass.

Note

Make sure any glue, ink, correction fluid, or the like on the original document is completely dry before loading it on the Platen Glass.

1

2

Lift the Document Cover.

Load the original with the side to be

copied / scanned facing down on the Platen Glass.

To make copies or scan documents

Place the original in landscape orientation and align the upper corner of it with the alignment mark as shown in the figure on the right.

Platen Glass

Before Using the Machine

9

Page 13
Image 13
Canon MP470 Handling the Original Document, Screen-saver Mode, Original Document Requirements, Loading Original Documents