Canon MP470 quick start Prepare to load paper, Load Paper

2	Prepare to load paper.						(1)
	(1)	Open	the Paper	Support, then pull out the
		Paper	Support	Extension.
	(2)	Open	the Paper	Output Tray.
	(3)	Open the Output Tray Extension.
	(4)	Adjust	the position of the Paper Thickness
		Lever.
		Set it to the right when printing on
		envelopes or T-shirt transfers, and left when			(4)	(3)	(2)
		printing on any other type of paper. See

"Paper Handling" on page 13.

Note

If the corners or edges of the paper are smudged, try to print with the Paper Thickness Lever set to the right. It may improve print quality.

Reset the Paper Thickness Lever to the left when you finish printing.

For details on the Paper Thickness Lever, refer to "Inside" in "Main Components" of the User's Guide on-screen manual.

3	Load the	paper.		(1)
	(1) Load	the paper in the Rear Tray	/t_	_/',\"b_

with the print side facing UP.

(2)Align the paper stack against the

right side of the Rear Tray. _ .,)

(3)Pinch the Paper Guide and slide it

against the left side of the paper	(2)
stack.	(3)

4 Specify the page size and media

type settings according to the loaded paper.

*Do not load higher than the Load Limit Mark (A).

Note

•When performing copy direct printing without using a computer, select the size and type of the loaded paper in Page size and Media type by pressing the Settings button in each mode.

For details on the copy mode settings, see "Setting Items" on page 20.

For details on the memory card mode settings, see "Setting items" on page 26.

•When using the machine connected to a computer, select the size and type of the loaded paper in Page Size (or Paper Size) and Media Type in the printer driver.

For details on printer driver settings, see "Printing with Windows" on page 29 or "Printing with Macintosh" on page 30.

16 Before Using the Machine