Print Head Deep Cleaning

If printquality does not improve by standard Print Head Cleaning, try Print Head Deep Cleaning,
which is a more powerful process. Note thatcleaning the Print Head causes usedink to be absorbed
in the inkabsorber. Print Head Deep Cleaning consumes more ink than standard PrintHead
Cleaning, soperform this procedure only when necessary.
1 Make sure that the machine is turned on, then load a sheet of A4 or Letter-sized
plain paper inthe Rear Tray.
2 Open the Paper Output Tray, then open the Output Tray Extension.
Set the Paper Thickness Lever to the left. For details on the Paper Thickness Lever, refer to
"Inside" in "Main Components" ofthe User's Guide on-screen manual.
3Start Print Head Deep Cleaning.
(1) Press the Menu button.
(2) Use the 4or ) button to select Maintenance/settings, then press the OK button.
The Maintenance/settings screen is displayed.
(3) Use the 4or ) button to select Maintenance, then press the OK button.
The Maintenance screen is displayed.
(4) Use the ,L or v button to select Deep cleaning, then press the OK button.
4

(s)

The confirmation screen isdisplayed.
Use the A or v button to select Yes, then press the OK button.
Print Head Deep Cleaning starts.
Do not perform any other operations until Print Head Deep Cleaning finishes. This takes
about one minute.
Confirm the condition of the Print Head.
(1) Print the nozzle check pattern to check the print head condition.
See "Printing the Nozzle Check Pattern" on page 39.
(2) If the problem is not resolved, perform Print Head Deep Cleaning again.
(3) If this does not solve the problem, a FINE Cartridge may have run out of ink. Replace it
with a new one. See "Replacing a FINE Cartridge" on page 46.

Routine Maintenance 43