7
105
Input Data Format
(67) Selecting the horizontal size of a bar code (GS w n)Code: [1D] h + [77] h + n
* (2 ≤ n ≤ 6) Data are expressed in Hex code.
Selects the horizontal size of a bar code.
• n indicates the number of dots of a fine bar in the horizontal direction.
• The initial value of the horizontal size is “n = 3”.
(68) Specifying and Clearing smoothing (GS b n)Code: [1D] h + [62] h + n
Data are expressed in Hex code.
This command specifies or clears smoothing.
• In n, the least significant bit (n0) only is valid.
n0=0: Clears smoothing
n0=1: Specifies smoothing
• The object of smoothing is the internal characters and download characters.
• Even when smoothing is specified, if either the vertical enlargement rate or the
horizontal enlargement rate is normal even in only one direction, smoothing is not
executed.
• The initial value is “n0=0".