Basic Specifications, 118 | CBM America CBM-262 specs

Chapter 9 Appendix

Basic Specifications

	Item		Content		Remarks
	Printing Method	Line Thermal Printing Method
	Printing Width	54mm, 432 dots			Non-printing area:
	Printing Width	(Total dots in head: 448 dots)			2 mm on each end.
		(Total dots in head: 448 dots)			2 mm on each end.

	Dot Density	8 dots/mm (Horizontal/Vertical)
	Paper Feed Pitch	0.125mm
	Printing Speed	62.5 mm/sec. (500 dot line/sec)			at maximum speed
	Number of Printing	36 Columns (Horizontal 12 × Vertical 24		Font A)
	Columns	48 Columns (Horizontal 9 × Vertical 24		Font B)
	Types of Characters	Alphanumeric, International Characters
	Emulations	ESC/POS™ compatible
	Bar Code Types	UPC-A/E, JAN(EAN)13 Columns/8 Columns,
	Bar Code Types	ITF CODE39, CODABAR
		ITF CODE39, CODABAR

	Line Interval	4.23 mm (1/6 inch)
	Line Interval	Can be set by commands. Min. 1/203 inch.
		Can be set by commands. Min. 1/203 inch.
	Paper	Thermal roll paper 58 × φ 83 mm
	Paper	φ 83 mm (See paper specifications.)
		φ 83 mm (See paper specifications.)
	Interfaces	RS-232C/Centronics			Factory Option
	Input Buffer	72 Bytes/8K Bytes
	Input Buffer	(Set by the operation panel.)
		(Set by the operation panel.)
	Power Supply	AC120V±10%	60Hz		Factory Option
	Voltage	AC230V±10%	50/60Hz
	Power	42W			ASCII Slide Pattern
	Consumption	42W			Printing
	Consumption				Printing
	Weight	Approx. 2.3 kg			Main unit only
	External	128 × 359.5 × 162.5mm
	Dimensions	128 × 359.5 × 162.5mm
	Dimensions

	Operating	5~40°C
	Temperature	5~40°C			see page 116
	Temperature	30~80%RH(There should be no condensation.)			see page 116
	and Humidity	30~80%RH(There should be no condensation.)
	and Humidity

	Storage
	Temperature	– 10~60°C 10~90%RH
	and Humidity

		Print head life:
		Pulse resistance: 50 million pulses
		(Page coverage: 12.5%)
	Reliability	Wear Resistance 30 Km
	Reliability	(Normal temperature and humidity,
		(Normal temperature and humidity,
		using the recommended paper)
		Printer Mechanism: MCBF 5 million lines
		Auto Cutter Life: 300,000 cuts

9

118

Image 128

CBM America CBM-262 user manual Basic Specifications, 118

Contents

UsersManual Declaration of Conformity FCC Compliance Statement For America Users EMI Compliance Statement for Canadian Users Important Safety Instructions Page Page Daily Maintenance Contents Print Control Codes Features Accessories Names and Functions of Parts Outline Features AccessoriesStandard Specifications without Journal Protection Key Optional Specifications with Journal Protection Key Rear Cover Names and Functions of PartsPrinter Unit Power Indicator Green Error Indicator OrangeOperation Panel Receipt Key Connectors Bottom View Factory DIP Switch Settings DIP Switch Above switches are shown in the OFF position Getting Started Connecting the Interface Cable Insert the cables connector into the interface connectorConnecting the Cable to the Computer Terminal Fastening the Cable Terminals Connecting the Drawer Kick Cable Connect the drawer kick cable to the drawer kick con- nector Connecting the Power Supply Paper Handling Setting the Receipt Roll Paper Press the I side of the power switch to turn the power on Setting the Receipt Roll Paper Setting the Journal Roll Paper Open the rear cover Lower the head up lever in the arrow direction About 30 cm Spool Partner Setting the Journal Roll Paper Replacing the Roll Paper Set a new roll of roll paper Replace the cover Printing Area Specified Paper and Printing AreaSpecified Paper Using Printer Operation Panel Keys Print Density Level Paper Condition Entering Configuration Mode Turn the power off, then turn it on again Test Printing DIP Switches DIP SwitchContent SW1-5 SW1-6 SW1-7 SW1-8 International Character Set SW2-2 SW2-1 Baud Rate Setting SW2-4 SW2-3 Parity Setting Sensors Error Indications Sensors Error Indications Sensors Printer Cover Open Sensor Sensor Lever Setting MethodAdjustment Scale Error Indications Power LED Error LED Serial Interface Parallel Interface Drawer Kick Connector Interfaces Pin No SpecificationsSerial Interface Explanation of Signal Names Input/Output Circuits Reset by DSR Reset by Init Protocols Timing Chart Parallel Interface When Receiving the Init Signal Init Signal Lines and Pin Arrangement Function Chapter Interfaces Electrical Characteristics Drawer Kick ConnectorDrawer Kick Drive Signal Connector Connection Diagram Signal Name Function Drive Circuit Interfaces Print Control Codes List of Control Codes Input Data Format Character Command List of Control Codes List of Control Codes Print Control Codes Print command CR Input Data FormatHorizontal tab HT Line feed LF Printing in the page mode and return FF Canceling of print data in the page modeJournal tab RS Sending the status in real time DLE EOT n Command and Function Status Distinguishing the Sending Status Bit Function Bit Function Value Error Factor Status when n = 3 is specified Printing of data in the page mode ESC FF Real time enquiry to printer DLE ENQ n Setting the space between characters ESC SP n Specifying the print mode all at once ESC ! n Specifying the absolute print position ESC $ n1 n2 Specifying/Clearing the download character set ESC % n Defining download characters ESC & s n m a D1 D2~Dn Example Case of Font B MHex Mode Vertical Direction Horizontal Direction Specifying a bit image ESC * m n1 n2 D1~Dn Relationship between bit image data and printed dots Specifying/Clearing underline ESC n Specifying the 1/6 inch line feed amount ESC Specifying the line feed amount ESC 3 n Controlling data input ESC = n Erasing download characters ESC ? n Specifying/Clearing bold characters ESC E n Setting the horizontal tab position ESC D n NULPrinter initialization ESC @ Specifying/Clearing double strike characters ESC G n Printing and paper feeding ESC J n Selecting the page mode ESC L ESC SP, FS S Selecting international characters ESC R n NHex Character Set Selecting the standard mode ESC S Starting Point → → → → Left to Right Top Left Setting the printing area in the page mode ESC W Input Data Format Specifying the relative printing position ESC \ n1 n2 Arranging the printing position ESC a n Selecting the printing sheet ESC c 0 n Selecting the setting sheet ESC c 1 n Enabling/Disabling the panel switch ESC c 5 n Generates a specification pulse ESC p m n1 n2 Print and feed paper n lines ESC d nFull cut ESC l Partial cut ESC m Selecting the character code table ESC t n Character Type Peripheral sevice status signal ESC u n Sending the printer status ESC Specifying/Clearing inverted characters ESC n Specifying the character size GS ! n Bits Value Print Control Codes Defining a downloaded bit image GS * n1 n2 Dn Mode Name Vertical Dot Density Printing a downloaded bit image GS / m Starting and ending a macro definition GS Hex Print Position Specifying/Clearing Black/White reverse printing GS B nSelecting the HRI character print position GS H n Setting the left margin GS L n1 n2 Printable Range Left Margin Width of Print Area Specifying/Clearing reduced character printing GS M n Setting the basic calculation pitch GS P x y Cutting of paper GS V m, GS V m n Setting the print area width GS W n1 n2 Printable Area Left Margin Print Area Width Printable Area Left Margin Left margin Is erased Print area width Input Data Format Execution of a macro GS n1 n2 n3 Enabling/Disabling automatic sending of the status GS a n Bit Status that is Object of ASB Value Bit Status Value LOW High Third Byte Paper Sensor Information Selecting the font of HRI characters GS f n Selecting the bar code height GS h nNHex Font 100 101 Printing bar codes. GS kn 1 Dn NULDefinition Range 102 103 Sending of the status GS r nBit Printer Status Value 104 Selecting the horizontal size of a bar code GS w n 105 106 Code Japanese Code Table International Character Code Table 107 Code 108 109 110 Japanese Code Table 111 International Character Code Table 112 Appendices 113 Journal Protection Key 114 115 Maintenance, CautionsRemoving Paper Jams Operating Temperature and Humidity 117 SpecificationsModel Classification Basic Specifications 118 119 Specified Paper External View 120 PC74903-10