FCC Compliance Statement For America Users | CBM America CBM-262

Cautions

1.Please read this user's manual thoroughly before attempting to use this printer. After read- ing, keep this manual in a secure place where it can be referred to easily if necessary.

2.The contents of this user's manual are subject to partial modification without prior notice.

3.Transfer of the contents of this user's manual, either in part or in whole, without permis- sion is strictly prohibited.

4.Do not attempt maintenance, disassembly or repairs of any parts of this printer except as indicated in this user's manual.

5.This company shall not be responsible for damages caused by improper operation or han- dling of this printer by the customer, or caused by the operating environment.

6.Do not attempt any operations which are not described in this user's manual. doing so could cause an accident or breakdown.

7.Data, etc. are basically temporary, and cannot be stored or preserved for extended periods or permanently by this printer. This company shall not be liable in any way for damages of loss of profits, etc. resulting from loss of data due to breakdown, repairs or inspections, etc. Please understand this point in advance.

8.If you find any points in these materials which are uncertain, are misprinted or are missing, please notify this company.

9.Please note that this company shall not be liable for any influence which may effect opera- tion of this printer arising from 8 items above.

FCC COMPLIANCE STATEMENT

FOR AMERICA USERS

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason- able protection against harmful interference when the equipment is operated in a commer- cial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harm- ful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Image 3

CBM America CBM-262 user manual FCC Compliance Statement For America Users

Contents

UsersManual Declaration of Conformity FCC Compliance Statement For America Users EMI Compliance Statement for Canadian Users Important Safety Instructions Page Page Daily Maintenance Contents Print Control Codes Outline Features Accessories Names and Functions of Parts Optional Specifications with Journal Protection Key FeaturesAccessories Standard Specifications without Journal Protection Key Names and Functions of Parts Printer UnitRear Cover Receipt Key Power Indicator GreenError Indicator Orange Operation Panel Bottom View Connectors DIP Switch Above switches are shown in the OFF position Factory DIP Switch Settings Getting Started Fastening the Cable Terminals Connecting the Interface CableInsert the cables connector into the interface connector Connecting the Cable to the Computer Terminal Connect the drawer kick cable to the drawer kick con- nector Connecting the Drawer Kick Cable Connecting the Power Supply Paper Handling Press the I side of the power switch to turn the power on Setting the Receipt Roll Paper Setting the Receipt Roll Paper Open the rear cover Setting the Journal Roll Paper About 30 cm Lower the head up lever in the arrow direction Spool Partner Setting the Journal Roll Paper Replacing the Roll Paper Replace the cover Set a new roll of roll paper Specified Paper and Printing Area Specified PaperPrinting Area Using Printer Print Density Level Paper Condition Operation Panel Keys Turn the power off, then turn it on again Entering Configuration Mode Test Printing SW1-5 SW1-6 SW1-7 SW1-8 International Character Set DIP SwitchesDIP Switch Content SW2-4 SW2-3 Parity Setting SW2-2 SW2-1 Baud Rate Setting Sensors Error Indications Sensors Error Indications Printer Cover Open Sensor Sensors Setting Method Adjustment ScaleSensor Lever Power LED Error LED Error Indications Interfaces Serial Interface Parallel Interface Drawer Kick Connector Specifications Serial InterfacePin No Input/Output Circuits Explanation of Signal Names Reset by Init Reset by DSR Protocols Parallel Interface Timing Chart When Receiving the Init Signal Init Function Signal Lines and Pin Arrangement Chapter Interfaces Drawer Kick Connector Drawer Kick Drive SignalElectrical Characteristics Signal Name Function Connector Connection Diagram Drive Circuit Interfaces List of Control Codes Input Data Format Print Control Codes List of Control Codes Character Command List of Control Codes Print Control Codes Line feed LF Print command CRInput Data Format Horizontal tab HT Sending the status in real time DLE EOT n Printing in the page mode and return FFCanceling of print data in the page mode Journal tab RS Distinguishing the Sending Status Command and Function Status Bit Function Value Bit Function Error Factor Status when n = 3 is specified Real time enquiry to printer DLE ENQ n Printing of data in the page mode ESC FF Setting the space between characters ESC SP n Specifying the print mode all at once ESC ! n Specifying/Clearing the download character set ESC % n Specifying the absolute print position ESC $ n1 n2 Defining download characters ESC & s n m a D1 D2~Dn Example Case of Font B Specifying a bit image ESC * m n1 n2 D1~Dn MHex Mode Vertical Direction Horizontal Direction Relationship between bit image data and printed dots Specifying the 1/6 inch line feed amount ESC Specifying/Clearing underline ESC n Specifying the line feed amount ESC 3 n Erasing download characters ESC ? n Controlling data input ESC = n Setting the horizontal tab position ESC D n NUL Printer initialization ESC @Specifying/Clearing bold characters ESC E n Printing and paper feeding ESC J n Specifying/Clearing double strike characters ESC G n ESC SP, FS S Selecting the page mode ESC L NHex Character Set Selecting international characters ESC R n Selecting the standard mode ESC S Starting Point → → → → Left to Right Top Left Setting the printing area in the page mode ESC W Input Data Format Specifying the relative printing position ESC \ n1 n2 Selecting the printing sheet ESC c 0 n Arranging the printing position ESC a n Selecting the setting sheet ESC c 1 n Enabling/Disabling the panel switch ESC c 5 n Partial cut ESC m Generates a specification pulse ESC p m n1 n2Print and feed paper n lines ESC d n Full cut ESC l Character Type Selecting the character code table ESC t n Peripheral sevice status signal ESC u n Sending the printer status ESC Specifying/Clearing inverted characters ESC n Bits Value Specifying the character size GS ! n Print Control Codes Defining a downloaded bit image GS * n1 n2 Dn Printing a downloaded bit image GS / m Mode Name Vertical Dot Density Starting and ending a macro definition GS Specifying/Clearing Black/White reverse printing GS B n Selecting the HRI character print position GS H nHex Print Position Printable Range Left Margin Width of Print Area Setting the left margin GS L n1 n2 Specifying/Clearing reduced character printing GS M n Setting the basic calculation pitch GS P x y Cutting of paper GS V m, GS V m n Printable Area Left Margin Print Area Width Setting the print area width GS W n1 n2 Is erased Print area width Printable Area Left Margin Left margin Input Data Format Execution of a macro GS n1 n2 n3 Bit Status that is Object of ASB Value Enabling/Disabling automatic sending of the status GS a n LOW High Bit Status Value Third Byte Paper Sensor Information 100 Selecting the font of HRI characters GS f nSelecting the bar code height GS h n NHex Font Printing bar codes. GS kn 1 Dn NUL Definition Range101 102 Sending of the status GS r n Bit Printer Status Value103 104 105 Selecting the horizontal size of a bar code GS w n 106 107 Code Japanese Code Table International Character Code Table 108 Code 109 110 111 Japanese Code Table 112 International Character Code Table 113 Appendices 114 Journal Protection Key Maintenance, Cautions Removing Paper Jams115 Operating Temperature and Humidity Specifications Model Classification117 118 Basic Specifications Specified Paper 119 120 External View PC74903-10