CBM America CBM-262 user manual Operation Panel Keys, Print Density Level Paper Condition

4

Chapter 4 Using the Printer

Operation Panel Keys

Use the RECEIPT key and JOURNAL key, in accordance with the query printing system, to set the printer internally.

Items which can be set are as follows.

•Receipt print density.

Adjusts the receipt print density. (See the table below.)

•Journal print density.

Adjusts the journal print density. (See the table below.)

•Cover Open

Sets the cover sensor on enabled or disabled.

•Auto Cutter

Sets the auto cutter on enabled or disabled.

•Auto Loading

Sets the auto loading function on enabled or disabled for setting roll paper.

•Receipt Paper Near End

Sets the print stop function on enabled or disabled in response to signals from the receipt paper near end sensor.

•Journal Paper Near End

Sets the print stop function on enabled or disabled in response to signals from the journal paper near end sensor.

•CR Operation

Sets CR+LF / LF / Disregard.

•Reset by DSR

Sets enabling or disabling of reset by the serial interface DSR signal.

•Reset by INIT

Sets enabling or disabling of reset by the serial interface INIT signal.

•Error Handshake

Sets whether the interface is changed to the BUSYstate when a printer error occurs.

*Relationship between each specified paper and print density (Use this as a standard.)

Print Density Level	Paper	Condition
1	TF50KS-E2c, F220vp.	Light
2
3	PD160R, PD160R-N
4		Dark

22