Part Number Description | Cisco Systems 3750-X, 3560-X instruction

Chapter 1 Product Overview

Front Panel Description

				Table 1-4	Cisco SFP Modules Supported for the 3750-X and 3560-X Switches

				Part Number		Description

				GLC-GE-100FX=		100FX SFP on GE SFP ports for LAN switches1
				GLC-LH-SM=		GE SFP, LC connector LX/LH transceiver

				GLC-SX-MM=		GE SFP, LC connector SX transceiver

				GLC-T=		1000BASE-T SFP transceiver module for copper connections

				GLC-ZX-SM=		1000BASE-ZX SFP module for SMF, 1550 nm

				GLC-BX-D=		1000BASE-BX10 SFP module for single-strand SMF, 1490-nm TX,
						1310-nm RX wavelength

				GLC-BX-U=		1000BASE-BX10 SFP module for single-strand SMF, 1310-nm TX,
						1490-nm RX wavelength

				CWDM-SFP-1470=		CWDM 1470-nm SFP Gigabit Ethernet and 1G/2G FC

				CWDM-SFP-1490=		CWDM 1490-nm SFP Gigabit Ethernet and 1G/2G FC

				CWDM-SFP-1510=		CWDM 1510-nm SFP Gigabit Ethernet and 1G/2G FC

				CWDM-SFP-1530=		CWDM 1530-nm SFP Gigabit Ethernet and 1G/2G FC

				CWDM-SFP-1550=		CWDM 1550-nm SFP Gigabit Ethernet and 1G/2G FC

				CWDM-SFP-1570=		CWDM 1570-nm SFP Gigabit Ethernet and 1G/2G FC

				CWDM-SFP-1590=		CWDM 1590-nm SFP Gigabit Ethernet and 1G/2G FC

				CWDM-SFP-1610=		CWDM 1610-nm SFP Gigabit Ethernet and 1G/2G FC

				SFP-GE-S=		1000BASE-SX SFP module for MMF, 850 nm (DOM)2
				SFP-GE-L=		1000BASE-LX/LH SFP module for SMF, 1300 nm (DOM)2
				DWDM-SFP-3033=		DWDM SFP 1530.33-nm SFP (100 GHz ITU grid)

				DWDM-SFP-3112=		DWDM SFP 1531.12-nm SFP (100 GHz ITU grid)

				DWDM-SFP-3190=		DWDM SFP 1531.90-nm SFP (100 GHz ITU grid)

				DWDM-SFP-3268=		DWDM SFP 1532.68-nm SFP (100 GHz ITU grid)

				DWDM-SFP-3346=		DWDM SFP 1533.47-nm SFP (100 GHz ITU grid)

				DWDM-SFP-3425=		DWDM SFP 1534.25-nm SFP (100 GHz ITU grid)

				DWDM-SFP-3504=		DWDM SFP 1535.04-nm SFP (100 GHz ITU grid)

				DWDM-SFP-3582=		DWDM SFP 1535.82-nm SFP (100 GHz ITU grid)

				DWDM-SFP-3661=		DWDM SFP 1536.61-nm SFP (100 GHz ITU grid)

				DWDM-SFP-3739=		DWDM SFP 1537.40-nm SFP (100 GHz ITU grid)

				DWDM-SFP-3819=		DWDM SFP 1538.19-nm SFP (100 GHz ITU grid)

				DWDM-SFP-3898=		DWDM SFP 1538.98-nm SFP (100 GHz ITU grid)

				DWDM-SFP-3977=		DWDM SFP 1539.77-nm SFP (100 GHz ITU grid)

				DWDM-SFP-4056=		DWDM SFP 1540.56-nm SFP (100 GHz ITU grid)

				DWDM-SFP-4134=		DWDM SFP 1541.35-nm SFP (100 GHz ITU grid)

				DWDM-SFP-4214=		DWDM SFP 1542.14-nm SFP (100 GHz ITU grid)

				DWDM-SFP-4294=		DWDM SFP 1542.94-nm SFP (100 GHz ITU grid)

			Catalyst 3750-X and 3560-X Switch Hardware Installation Guide


	1-6					OL-19593-01
	1-6					OL-19593-01

Image 16

Cisco Systems 3750-X, 3560-X manual Part Number Description

Contents

Americas Headquarters Text Part Number OL-19593-01Page N T E N T S Attaching the Rack-Mount Brackets Where to Go Next SFP and SFP+ Module Cable Specifications B-5 Vii Viii Purpose Catalyst 3750-X switches Catalyst 3560-X switchesRelated Publications Obtaining Documentation and Submitting a Service Request Switch Models Switch Model Cisco IOS Image Description Switch Part Number Description 10/100/1000 Ethernet Ports Front Panel DescriptionPoE+ Ports Network Modules SFP and SFP+ Modules Network Module Description Part Number Description SFP-10G-LR= SFP-10G-SR=SFP-10G-LRM= SFP-H10GB-CU1M= LEDs SFP-H10GB-CU3M=SFP-H10GB-CU5M= XPS 1 LED System LED Port LEDs and ModesColor System Status Color XPS Status Mode LED Port Mode Description Port Mode Port LED Color Meaning USB Console LED PWR LED Catalyst Master LED CatalystStack LED Catalyst Color PoE+ LED Color PoE+ Status USB Mini-Type B Port Network Module LEDsG1 LED G3 LED G2/TE1 LED G4/TE2 LED Color Network Module Link Status Catalyst 3560-X Switch Rear Panel Rear Panel Description RS-232 console is disabled RS-232 console is enabled RJ-45 Console Port LEDUSB Type a Interface StackWise Ports Switch Power Supply Modules Power Supply ModulesPort Port PoE+ Non-PoE+ Power Supply Module Switch1 Port Port PoE+ Non-PoE+ Power Supply Module Switch PoE Option Port SwitchAC-Power Supply Module LEDs DC-Power Supply Module LEDs XPS Connector Fan Modules StackPower Connector Catalyst 3750-X Switches Management PortsEthernet Management Port Active link to PC Management Options USB Mini-Type B PortOff Amber Inactive link Post failure Network Configurations Preparing for Installation Safety Warnings OL-19593-01 Installation Guidelines Statement 371-Power Cable and AC Adapter Planning a Switch Data Stack Catalyst 3750-X Switches Tools and Equipment Data Stack Cabling Configurations Switch Data Stacking Guidelines 3-meter StackWise Cables Data Stack Bandwidth and Partitioning Examples Example of a Data Stack with Half Bandwidth Connections Power On Sequence for Switch Data Stacks Planning a StackPower Stack Catalyst 3750-X SwitchesStackPower Stacking Guidelines StackPower Cabling Configurations Part Number Cable Type Length CAB-SPWR-30CMCAB-SPWR-150CM CAB-XPS-58CM 10 StackPower Ring Topology 253397 253398 StackPower Partitioning Examples Installing the SwitchRack-Mounting Switch Installation Installing the Switch 23/24-inch brackets, part number Inch brackets, part numberEtsi brackets, part number Attaching the Rack-Mount Brackets 18 Attaching Brackets for 19-inch Racks Mounting the Switch in a Rack Mounting the Switch in a Rack Table- or Shelf-Mounting 20 Attaching the Adhesive Pads for Table- or Shelf-Mounting Connecting to the StackWise Ports Catalyst 3750-X Switches After Installing the Switch Connecting to the StackPower Ports Catalyst 3750-X Switches Connecting the StackPower Ports to the XPS-2200 Installing a Network Module in the Switch Installing Network Modules You need to supply a number-2 Phillips screwdriver Installing SFP and SFP+ Modules Removing a Network Module Installing an SFP Module 26 Installing an SFP Module in the Network Module Connecting Devices to the Ethernet Ports Removing an SFP Module PoE+ Port Connections 10/100/1000 Ethernet Port ConnectionsDevice Crossover Cable Where to Go Next Start an Snmp application such as the CiscoView application Power Supply and Fan Module Installation Power Supply Module Overview C3KX-PWR-715WAC= DC power supply moduleBlank cover AC power supply module AC power cord connector Power cord retainerAC OK LED Release latch DC OK LED DC power supply module Grounding terminalExtraction handle Installation Guidelines AC Power Supply Module LEDsDC Power Supply Module LEDs Release handles Retainer clips Installing an AC Power Supply Turn off the power at its sourceRemove the power cord from the power cord retainer Remove the power cord from the power connector Installing a DC Power Supply Inserting the AC-Power Supply in the Switch Equipment That You Need Grounding the Switch Stripping the Ground Wire Installing the DC Power Supply in the Switch See the Installation Guidelines, Wiring the DC Input Power Source 11 Inserting the DC Power Supply in the Switch Finding the Power Supply Module Serial Number 13 DC Source a and Source B Connections with Common Ground 15 715-W and 350-W AC Power Supply Module Serial Number Fan Module Overview Fan Module Finding the Fan Module Serial Number Installing a Fan ModuleFan LED Retainer clip Exhaust vent Extraction handles 19 Fan Module Serial Number Switch Post Results Diagnosing ProblemsSwitch LEDs Switch Connections Bad or Damaged CableEthernet and Fiber Cables Link Status PoE Port Connections 10/100/1000 Port ConnectionsSFP Modules Switch Performance Interface SettingsPing End Device Spanning Tree Loops Autonegotiation and Network Interface Cards Resetting the Switch to the Factory Default SettingsCabling Distance Finding the Switch Serial Number Switch Serial Number Location Physical Specifications Switch SpecificationsEnvironmental Ranges Power Supply Module Specifications Power Specifications C3KX-PWR-1100WACC3KX-PWR-715WAC C3KX-PWR-350WAC Fan Module Specifications Physical SpecificationOperating Specification Airflow 60 cfm Description Specification MICChina EMC certifications Gost OL-19593-01 Connector Specifications 10/100/1000 Ports Gigabit Ethernet CX1 SFP+ Copper Connectors Figure B-2 10-Gigabit Ethernet CX1 Copper Connector example Figure B-4 Simplex LC Cable Connector 10/100 Ethernet Management Port Console Port Figure B-7 10/100 Port Pinouts Cable and Adapter Specifications SFP and SFP+ Module Cable Specifications GLC-T 1000BASE-LX/LHMMF3 GLC-LH-SM Four Twisted-Pair Cable Pinouts Two Twisted-Pair Cable Pinouts Switch Console RJ-45-to-DB-9 Port DTE Identifying a Crossover CableConsole Port Adapter Pinouts Device Switch Console RJ-45-to-DB-25 Port DTE GNDRxD TxD DSR DTR CTS RTS OL-19593-01 Accessing the CLI Through Express Setup Accessing the CLIAccessing the CLI Through a Console Port RJ-45 Console Port Use one of these options to access the CLIUSB Console Port Installing the Cisco Microsoft Windows USB Device Driver Mode Installing the Cisco Microsoft Windows XP USB Driver Installing the Cisco Microsoft Windows 2000 USB Driver Uninstalling the Cisco Microsoft Windows USB Driver Using the Add or Remove Programs utility IP Settings Entering the Initial Configuration InformationConfiguring the Setup Program Enter an enable password, and press Return These choices appear Connectors and cables Console port Connectors and cables Described IN-2 Port mode Post results Speed Stack StackPower Status Post Power-supply moduleProduct disposal warning Connector Described LED XPS IN-6