Preparing for Installation, Safety Warnings | Cisco Systems 3560-X

C H A P T E R 2

Switch Installation

This chapter describes how to install and connect a Catalyst 3750-X or a 3560-X switch. It also includes planning and cabling considerations for stacking switches (only Catalyst 3750-X switches). Read the topics and perform the procedures in this order:

•Preparing for Installation, page 2-1

•Planning a Switch Data Stack (Catalyst 3750-X Switches), page 2-4

•Planning a StackPower Stack (Catalyst 3750-X Switches), page 2-8

•Installing the Switch, page 2-14

•Connecting to the StackWise Ports (Catalyst 3750-X Switches), page 2-21

•Installing a Network Module in the Switch, page 2-23

•Installing SFP and SFP+ Modules, page 2-25

•Connecting Devices to the Ethernet Ports, page 2-27

•Where to Go Next, page 2-29

For initial switch setup, how to assign the switch IP address, and for powering information, see the switch getting started guide on Cisco.com.

Preparing for Installation

•Safety Warnings, page 2-1

•Installation Guidelines, page 2-3

•Tools and Equipment, page 2-4

Safety Warnings

This section includes the basic installation caution and warning statements. Translations of the warning statements appear in the Regulatory Compliance and Safety Information for the Catalyst 3750-X

and 3560-X Switch document available at Cisco.com. Read this section before you start the installation procedure.

Catalyst 3750-X and 3560-X Switch Hardware Installation Guide

	OL-19593-01	2-1

Image 33

Cisco Systems 3560-X, 3750-X manual Preparing for Installation, Safety Warnings

Contents

Text Part Number OL-19593-01 Americas HeadquartersPage N T E N T S Attaching the Rack-Mount Brackets Where to Go Next SFP and SFP+ Module Cable Specifications B-5 Vii Viii Catalyst 3750-X switches Catalyst 3560-X switches PurposeRelated Publications Obtaining Documentation and Submitting a Service Request Switch Model Cisco IOS Image Description Switch Models Switch Part Number Description Front Panel Description 10/100/1000 Ethernet PortsPoE+ Ports Network Modules Network Module Description SFP and SFP+ Modules Part Number Description SFP-10G-SR= SFP-10G-LR=SFP-10G-LRM= SFP-H10GB-CU1M= SFP-H10GB-CU3M= LEDsSFP-H10GB-CU5M= XPS 1 LED Port LEDs and Modes System LEDColor System Status Color XPS Status Port Mode Port LED Color Meaning Mode LED Port Mode Description USB Console LED Master LED Catalyst PWR LED CatalystStack LED Catalyst Color Color PoE+ Status PoE+ LED Network Module LEDs USB Mini-Type B PortG1 LED G3 LED G2/TE1 LED G4/TE2 LED Color Network Module Link Status Rear Panel Description Catalyst 3560-X Switch Rear Panel RJ-45 Console Port LED RS-232 console is disabled RS-232 console is enabledUSB Type a Interface StackWise Ports Power Supply Modules Switch Power Supply ModulesPort Port PoE+ Non-PoE+ Power Supply Module Switch1 PoE Option Port Switch Port Port PoE+ Non-PoE+ Power Supply Module SwitchAC-Power Supply Module LEDs DC-Power Supply Module LEDs Fan Modules XPS Connector Management Ports StackPower Connector Catalyst 3750-X SwitchesEthernet Management Port Active link to PC USB Mini-Type B Port Management OptionsOff Amber Inactive link Post failure Network Configurations Safety Warnings Preparing for Installation OL-19593-01 Statement 371-Power Cable and AC Adapter Installation Guidelines Tools and Equipment Planning a Switch Data Stack Catalyst 3750-X Switches Switch Data Stacking Guidelines Data Stack Cabling Configurations 3-meter StackWise Cables Example of a Data Stack with Half Bandwidth Connections Data Stack Bandwidth and Partitioning Examples Planning a StackPower Stack Catalyst 3750-X Switches Power On Sequence for Switch Data StacksStackPower Stacking Guidelines StackPower Cabling Configurations CAB-SPWR-30CM Part Number Cable Type LengthCAB-SPWR-150CM CAB-XPS-58CM 10 StackPower Ring Topology 253397 253398 Installing the Switch StackPower Partitioning ExamplesRack-Mounting Switch Installation Installing the Switch Inch brackets, part number 23/24-inch brackets, part numberEtsi brackets, part number 18 Attaching Brackets for 19-inch Racks Attaching the Rack-Mount Brackets Mounting the Switch in a Rack Mounting the Switch in a Rack 20 Attaching the Adhesive Pads for Table- or Shelf-Mounting Table- or Shelf-Mounting After Installing the Switch Connecting to the StackWise Ports Catalyst 3750-X Switches Connecting to the StackPower Ports Catalyst 3750-X Switches Installing a Network Module in the Switch Connecting the StackPower Ports to the XPS-2200 You need to supply a number-2 Phillips screwdriver Installing Network Modules Removing a Network Module Installing SFP and SFP+ Modules 26 Installing an SFP Module in the Network Module Installing an SFP Module Removing an SFP Module Connecting Devices to the Ethernet Ports 10/100/1000 Ethernet Port Connections PoE+ Port ConnectionsDevice Crossover Cable Where to Go Next Start an Snmp application such as the CiscoView application Power Supply Module Overview Power Supply and Fan Module Installation DC power supply module C3KX-PWR-715WAC=Blank cover Power cord retainer AC power supply module AC power cord connectorAC OK LED Release latch DC power supply module Grounding terminal DC OK LEDExtraction handle AC Power Supply Module LEDs Installation GuidelinesDC Power Supply Module LEDs Release handles Retainer clips Turn off the power at its source Installing an AC Power SupplyRemove the power cord from the power cord retainer Remove the power cord from the power connector Inserting the AC-Power Supply in the Switch Installing a DC Power Supply Equipment That You Need Stripping the Ground Wire Grounding the Switch See the Installation Guidelines, Installing the DC Power Supply in the Switch 11 Inserting the DC Power Supply in the Switch Wiring the DC Input Power Source 13 DC Source a and Source B Connections with Common Ground Finding the Power Supply Module Serial Number 15 715-W and 350-W AC Power Supply Module Serial Number Fan Module Fan Module Overview Installing a Fan Module Finding the Fan Module Serial NumberFan LED Retainer clip Exhaust vent Extraction handles 19 Fan Module Serial Number Diagnosing Problems Switch Post ResultsSwitch LEDs Bad or Damaged Cable Switch ConnectionsEthernet and Fiber Cables Link Status 10/100/1000 Port Connections PoE Port ConnectionsSFP Modules Interface Settings Switch PerformancePing End Device Spanning Tree Loops Resetting the Switch to the Factory Default Settings Autonegotiation and Network Interface CardsCabling Distance Switch Serial Number Location Finding the Switch Serial Number Switch Specifications Physical SpecificationsEnvironmental Ranges Power Supply Module Specifications C3KX-PWR-1100WAC Power SpecificationsC3KX-PWR-715WAC C3KX-PWR-350WAC Physical Specification Fan Module SpecificationsOperating Specification Airflow 60 cfm MIC Description SpecificationChina EMC certifications Gost OL-19593-01 10/100/1000 Ports Connector Specifications Figure B-2 10-Gigabit Ethernet CX1 Copper Connector example Gigabit Ethernet CX1 SFP+ Copper Connectors 10/100 Ethernet Management Port Figure B-4 Simplex LC Cable Connector Figure B-7 10/100 Port Pinouts Console Port SFP and SFP+ Module Cable Specifications Cable and Adapter Specifications 1000BASE-LX/LH GLC-TMMF3 GLC-LH-SM Two Twisted-Pair Cable Pinouts Four Twisted-Pair Cable Pinouts Identifying a Crossover Cable Switch Console RJ-45-to-DB-9 Port DTEConsole Port Adapter Pinouts Device GND Switch Console RJ-45-to-DB-25 Port DTERxD TxD DSR DTR CTS RTS OL-19593-01 Accessing the CLI Accessing the CLI Through Express SetupAccessing the CLI Through a Console Port Use one of these options to access the CLI RJ-45 Console PortUSB Console Port Mode Installing the Cisco Microsoft Windows USB Device Driver Installing the Cisco Microsoft Windows 2000 USB Driver Installing the Cisco Microsoft Windows XP USB Driver Using the Add or Remove Programs utility Uninstalling the Cisco Microsoft Windows USB Driver Entering the Initial Configuration Information IP SettingsConfiguring the Setup Program Enter an enable password, and press Return These choices appear Console port Connectors and cables Described Connectors and cables IN-2 Status Port mode Post results Speed Stack StackPower Power-supply module PostProduct disposal warning XPS Connector Described LED IN-6