Chapter 1 Product Overview
Rear Panel Description
1 | Ground connector | 7 | Fan modules |
|
|
|
|
2 | 8 | ||
|
|
|
|
3 | 9 | Power supply module slot (blank module | |
|
|
| shown) |
|
|
|
|
4 | 10 | Power supply module (AC power supply | |
|
|
| module shown) |
|
|
|
|
5 | USB Type A connector | 11 | AC power (input) status LED |
|
|
|
|
6 | Reset button | 12 | Power supply (output) status LED |
|
|
|
|
RJ-45 Console Port LED
Table
Color
Off
Green
RJ-45 Console Port Status
RS-232 console is disabled.
RS-232 console is enabled.
USB Type A Interface
The USB Type A interface provides access to external USB FLASH devices (also known as thumb drives or USB keys).
The interface supports Cisco USB flash drives with capacities from 64 MB to 1 GB.
Cisco IOS software provides standard file system access to the flash device: read, write, erase, and copy, as well as formatting of the flash device with a FAT file system. You can boot the switch from a USB drive.
For information about the switch management ports, see the switch software configuration guide and the command reference on Cisco.com and the “Connector and Cable Specifications” section on page
StackWise Ports
The Catalyst
Caution Use only approved cables
You can order these StackWise cables from your Cisco sales representative:
•
•
•
| Catalyst |