![](/images/new-backgrounds/1197366/197366101x1.webp)
Using Phone Settings
Using Phone Settings
You can customize your Cisco Unified IP Phone by adjusting the ring tone, background image, and other settings.
Customizing Rings and Message Indicators
You can customize the way your phone indicates an incoming call and a new voice mail message. You can also adjust the ringer volume for your phone.
If you want to... | Then... |
| |
|
|
|
|
Change the ring tone per | 1. | Choose | > User Preferences > Rings. |
line | 2. | Choose a phone line or the default ring setting. | |
| |||
| 3. | Choose a ring tone to play a sample of it. | |
| 4. | Press Select and Save to set the ring tone, or press Cancel. | |
|
| ||
Change the ring pattern per | 1. Log in to your User Options web pages. (See the “Accessing Your | ||
line |
| User Options Web Pages” section on page 52.) | |
2. | Access your call ring pattern settings. (See the “Controlling Line | ||
| |||
|
| Settings on the Web” section on page 58.) | |
| Note Before you can access this setting, your system administrator might | ||
|
| need to enable it for you. | |
|
|
| |
Adjust the volume level for | Press | while the handset is in the cradle and the headset | |
the phone ringer | and speakerphone buttons are off. The new ringer volume is saved | ||
| automatically. |
| |
|
| ||
Change the way that the | 1. Log in to your User Options web pages. (See the “Accessing Your | ||
voice message light on your |
| User Options Web Pages” section on page 52.) | |
handset works | 2. | Access your message indicator settings. (See the “Controlling Line | |
| |||
|
| Settings on the Web” section on page 58.) | |
| Note Typically, the default system policy is to indicate a new voice | ||
|
| message by displaying a steady light on the handset light strip. | |
|
|
|
|
Cisco Unified IP Phone | 43 |