5-9
Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
OL-11497-03
Chapter 5 Field Diagnostics for the Cisco 12000 Series Router
Using the diag Command
Note Starting with Cisco IOS Release 12.0(22)S, the line card field diagnostics image
is unbundled from the main Cisco IOS image. Line card field diagnostics are now
stored and maintained as a separate image that must be available on a Flash
memory card or TFTP boot server before the diagnostics commands can be used.
Route processor and switch fabric card field diagnostics continue to be bundled
and do not need to be launched from a separate image.
Cisco 12000 Series Router RPs
The following command examples apply to GRP and PRP field diagnostics:
diag slot-number [verbose] [wait] [full] [coe]
diag slot-number previous
diag slot-number halt
Cisco 12000 Series Router SFCs and CSCs
The following command example applies to SFC and CSC field diagnostics:
diag slot-number [verbose]
diag Command Reference
Table 5-1 lists the diag command options and their descriptions.
Tab l e 5-1 diag Command Reference
Command Description
slot-number Slot number of the card you want to test.
source Specifies that the source path of the line card diagnostic
image follows. This keyword must be followed by either
the tftp or flash keyword.