Cisco Systems Cisco 12006, Cisco 12406 manual Press Return

Chapter 4 Troubleshooting the Installation

Performing Other Configuration Tasks

Step 8 Enter no in response to the system configuration dialog prompts until the following instruction is displayed:

Press RETURN to get started!

Step 9 Press Return.

After some interface configuration information is displayed, the user EXEC mode prompt appears:

router>

Step 10 Enter the enable command at the user EXEC mode prompt to enter privileged EXEC mode:

router> enable Password: <password> Router#

The prompt changes from router> to router# (> to #) indicates the change in command mode.

Step 11 Enter the show startup-configcommand at the privileged EXEC mode prompt to display the enable password in the configuration file.

router# show startup-config

.

.

.

Step 12 Enter the configure terminal command at the privileged EXEC mode prompt to enter global configuration mode:

router# configure terminal

Enter configuration commands, one per line. End with CNTL/Z. router(config)#

Step 13 Change the software configuration register value back to its original value (noted in Step 3). Alternatively, change this value to 0x0102 (the factory default) by using the config-register 0xvalue command:

router(config)# config-register 0xvalue

router(config)#

Value is a hexadecimal number preceded by 0x, as in the following example:

router(config)# config-register 0x0102

	Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
OL-11497-03		4-13