Cisco Systems Cisco 12006, Cisco 12406 - page 267

6-27
Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
OL-11497-03
Chapter 6 Maintaining the Router
Removing and Replacing an AC PDU
Step 5 Release the retention clip and disconnect each power supply cord from the PDU
(see Figure 6-10).
Step 6 Remove the blower module (Figure 6-12):
a. Lift the blower module handle to its raised (carrying) position.
b. Loosen the (4) captive screws on the blower module.
c. Remove the blower module by grasping it on each side and pulling it straight
back from the chassis.
Figure 6-12 Removing the Blower Module
101115
HIGH SPEED BLOWER