Cisco Systems Cisco 12406, Cisco 12006 manual Removing the Blower Module

Chapter 6 Maintaining the Router

Removing and Replacing a DC PDU

Step 4 Remove the blower module (Figure 6-21):

a.Lift the blower module handle to its raised (carrying) position.

b.Loosen the (4) captive screws on the blower module.

c.Remove the blower module by grasping it on each side and pulling it straight back from the chassis.

Figure 6-21 Removing the Blower Module

1 2

129401

Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide

6-40 OL-11497-03