Cisco Systems Cisco 12406, Cisco 12006 manual Chassis Cable-Management Bracket

Chapter 3 Installing the Router

Connecting RP and Line Card Cables

Step 3 Carefully route the interface cable through the chassis cable-management bracket and across the card to the card interface port; do this for one cable at a time.

Figure 3-7 Chassis Cable-Management Bracket

EJECT	-1
	SLOT	RESET
	-0
	SLOT	X
		AU

CONSOLE

CISCO 12000 SERIES

GIGABIT SWITCH ROUTER

	COLL RX
	-45
	RJ
LINK	TX
	MII

GIGABIT ROUTE PROCESSOR

101833

Step 4 Proceeding from left to right, identify the cable that connects to each card port and connect the cable to the RP or line card port.

Step 5 Proceeding from left to right, carefully wrap the cables into the line card cable-management bracket using the velcro straps.

	Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
3-12	OL-11497-03