Cisco Systems Cisco 12006, Cisco 12406 manual Seating a DC Power Supply

Chapter 6 Maintaining the Router

Removing and Replacing a DC PDU

Step 11 Reinstall the power supplies:

a.Push the power supply into its bay until it mates with its PDU connector.

Caution To prevent damage to the connectors, do not use excessive force when inserting the power supply into the chassis.

b.Close the ejector levers and tighten the captive screws to securely seat the power supply to the chassis (Figure 6-26).

c.Repeat steps a. and b. for the second power supply.

Figure 6-26 Seating a DC Power Supply

OUTPUT
OK	INPUT	M	ISWIRE
	OK

101117

	Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
OL-11497-03		6-45