Cisco Systems OL-24201-01 manual Policy, Related Topics

Chapter 9 Managing Policy Elements

Managing Policy Conditions

Table 9-1 Date and Time Properties Page (continued)

Option

Description

Duration

Start

End

Click one of the following options:

•Start Immediately—Specifies that the rules associated with this condition are valid, starting at the current date.

•Start On—Specify a start date by clicking the calendar icon next to the associated field to choose a specific start date, at which the condition becomes active (at the beginning of the day, indicated by the time 00:00:00 on a 24-hour clock).

You can specify time in the hh:mm format.

Click one of the following options:

•No End Date—Specifies that the rules associated with this date and time condition are always active, after the indicated start date.

•End By—Specify an end date by clicking the calendar icon next to the associated field to choose a specific end date, at which the date and time condition becomes inactive (at the end of the day, indicated by the time 23:59:59 on a 24-hour clock)

You can specify time in the hh:mm format.

Days and Time

Days and Time	Each square in the Days and Time grid is equal to one hour. Select a grid square to make the
section grid	corresponding time active; rules associated with this condition are valid during this time.
	A green (or darkened) grid square indicates an active hour.
	Ensure that you configure date and time conditions that correspond to the time zone in which your ACS
	server resides. Your time zone may be different from that of the ACS server.
	For example, you may receive an error message if you configure a date and time condition that is an hour
	ahead of your current time, but that is already in the past with respect to the time zone of your ACS server.
Select All	Click to set all squares in the grid to the active state. Rules associated with this condition are always valid.
Clear All	Click to set all squares in the grid to the inactive state. Rules associated with this condition are always
	invalid.
Undo All	Click to remove your latest changes for the active and inactive day and time selections for the date and
	time group.
		To add date and time conditions to a policy, you must first customize the rule table. See Customizing a
		Policy, page 10-4.
Step 4		Click Submit.
		The date and time condition is saved. The Date and Time Conditions page appears with the new date and
		time condition that you created or duplicated.

Related Topics

•Creating, Duplicating, and Editing a Custom Session Condition, page 9-5

•Deleting a Session Condition, page 9-6

•Configuring Access Service Policies, page 10-21

User Guide for Cisco Secure Access Control System 5.3

9-4 OL-24201-01