Cisco Systems OL-24201-01 manual Displaying Hit Counts, Deleting Service Selection Rules, 10-10

Chapter 10 Managing Access Policies

Configuring the Service Selection Policy

Displaying Hit Counts

Use this page to reset and refresh the Hit Count display on the Rule-based Policy page.

To display this page, click Hit Count on the Rule-based Policy page.

Table 10-4 Hit Count Page

Option	Description
Hit Counts Reset
Last time hit counts were	Displays the date and time of the last hit count reset for this policy.
reset for this policy
Reset hit counts display	Click Reset to reset the hit counts display to zero (0) for all rules on the Policy page.
for this policy
Hit Counts Collection
Hit counts are collected	Displays the interval between hit count collections.
every:
Last time hit counts were	Displays the date and time of the last hit count update for this policy.
collected for this policy:
Refresh hit counts display	Click Refresh to refresh the hit count display in the Policy page with updated hit counts for all
for this policy	rules. The previous hit counts are deleted.
	When a TACACS+ authentication request succeeds, the hit counts of the corresponding identity
	policy rule and authorization policy rule both increase by 1.

Deleting Service Selection Rules

Note You cannot delete the Default service selection rule.

To delete a service selection rule:

Step 1 Select Access Policies > Service Selection Policy.

The Service Selection Policy page appears, with a list of configured rules.

Step 2 Check one or more check boxes next to the rules that you want to delete.

Step 3 Click Delete.

The Service Selection Rules page appears without the deleted rule(s).

Step 4 Click Save Changes to save the new configuration.

	User Guide for Cisco Secure Access Control System 5.3
10-10	OL-24201-01