Cisco Systems OL-24201-01 Customizing Reports, Restoring Reports, Click Launch Interactive Viewer

Chapter 13 Managing Reports

Working with Catalog Reports

•Shared secret mismatch

Step 5 See the Troubleshooting RADIUS Authentications, page 14-6to troubleshoot a failed change of authorization attempt.

A failed dynamic CoA will be listed under failed RADIUS authentications.

Customizing Reports

To customize a system report:

Step 1 Select Monitoring & Reports > Reports > Catalog > report_type > report_name, where report_type is the type of report, and report_name is the name of the report that you want to customize.

The Reports page appears.

Step 2 Click the radio button next to the name of the report you want to customize, or click the name of the report you want to customize.

Step 3 Click Run.

The Run Report page appears.

Step 4 Modify fields in the Run Reports page as required.

Step 5 Click Run.

The report appears.

Step 6 Click Launch Interactive Viewer.

Step 7 Modify the report contents as required and click Save As to save the customized report with the same, or a different, report name in any Catalog > Reports page.

Note If you save the customized report with the same name as the original system report (overwriting the original system report), you cannot delete it. To restore a customized report to the default, preconfigured system report settings, see Restoring Reports, page 13-20.

The customized report is saved to your specified location.

Restoring Reports

Use the procedure described in this topic, to restore a system report that you have customized back to its original preconfigured system report settings.

This procedure resets all reports that reside in a report catalog type. For example, if you want to reset a specific customized report that resides in the Monitoring & Reports > Reports > Catalog > Endpoint page, this procedure completes that task but also resets all other reports within the Endpoint page.

Step 1 Select Monitoring & Reports > Reports > Catalog > report_type, where report_type is the type of report in which the customized report that you want to reset to the original system report settings resides.

Step 2 Click Reset Reports.

	User Guide for Cisco Secure Access Control System 5.3
13-20	OL-24201-01