Cisco Systems OL-24201-01 manual Viewing Radius Vendor-Specific Subattributes, 18-9

Chapter 18 Managing System Administration Configurations

Managing Dictionaries

Table 18-9 Creating, Duplicating, and Editing RADIUS Subattributes

Option

ID-Value

Description

(Optional) For the Enumeration attribute type only.

•ID—Enter a number from 0 to 999.

•Value—Enter a value for the ID.

•Click Add to add this ID-Value pair to the ID-Value table.

To edit, replace, and delete ID-Value pairs:

•Select the ID-Value pair from the ID-Value table.

•Click Edit to edit the ID and Value fields. Edit the fields as required.

•Click Add to add a new entry after you modify the fields.

•Click Replace to replace the same entry with different values.

•Click Delete to delete the entry from the ID-Value table.

	Attribute Configuration
	Add Policy Condition	Check this check box to enter a policy condition
		in which this subattribute will be used.
	Policy Condition Display Name	Enter the name of the policy condition that will
		use this subattribute.
Step 4	Click Submit to save the subattribute.

Viewing RADIUS Vendor-Specific Subattributes

To view the attributes that are supported by a particular RADIUS vendor:

Step 1 Choose System Administration > Configuration > Dictionaries > Protocols > RADIUS > RADIUS VSA.

The RADIUS VSA page appears.

Step 2 Check the check box next to the vendor whose attribute you want to view, then click Show Vendor Attributes.

The vendor-specific attributes and the fields listed in Table 18-7are displayed. You can create additional VSAs, and duplicate or edit these attributes. For more information, see Creating, Duplicating, and Editing RADIUS Vendor-Specific Subattributes, page 18-7.

	User Guide for Cisco Secure Access Control System 5.3
OL-24201-01		18-9