Cisco Systems OL-24201-01 General, Target Configuration, Deleting a Remote Log Target, 18-22

Chapter 18 Managing System Administration Configurations

Configuring Logs

•Remote Log Targets > Duplicate: “log_target”, where log_target is the name of the remote log target you selected in Step 2, if you are duplicating a remote log target.

•Remote Log Targets > Edit: “log_target”, where log_target is the name of the remote log target you selected in Step 2, if you are modifying a remote log target.

Step 3 Complete the required fields as described in Table 18-19:

Table 18-19	Remote Log Targets Configuration Page
Option	Description
General
Name	Name of the remote log target. Maximum name length is 32 characters.
Description	Description of the remote log target. Maximum description length is 1024 characters.
Type	Type of remove log target—Syslog (the only option).
Target Configuration
IP Address	IP address of the remote log target, in the format x.x.x.x.
Use	Click to enable the advanced syslog options—port number, facility code, and
Advanced	maximum length.
Syslog
Options
Port	Port number of the remote log target used as the communication channel between the
	ACS and the remote log target (default = 514). This option is only visible if you click
	Use Syslog Options.
Facility Code	Facility code. Valid options are:
	• LOCAL0 (Code = 16)
	• LOCAL1 (Code = 17)
	• LOCAL2 (Code = 18)
	• LOCAL3 (Code = 19)
	• LOCAL4 (Code = 20)
	• LOCAL5 (Code = 21)
	• LOCAL6 (Code = 22; default)
	• LOCAL7 (Code = 23)
	This option is only visible if you click Use Advanced Syslog Options.
Maximum	Maximum length of the remote log target messages. Valid options are from 200 to
Length	1024. This option is only visible if you click Use Advanced Syslog Options.

Step 4 Click Submit.

The remote log target configuration is saved. The Remote Log Targets page appears with the new remote log target configuration.

Related Topic

•Deleting a Remote Log Target, page 18-23

	User Guide for Cisco Secure Access Control System 5.3
18-22	OL-24201-01