Cisco Systems OL-24201-01 manual Duplicating a Rule, Editing Policy Rules, 10-38

Chapter 10 Managing Access Policies

Configuring Access Service Policies

Duplicating a Rule

You can duplicate a rule if you want to create a new rule that is the same, or very similar to, an existing rule. The duplicate rule name is based on the original rule with parentheses to indicate duplication; for example, Rule-1(1).

After duplication is complete, you access each rule (original and duplicated) separately.

Note You cannot duplicate the Default rule.

To duplicate a rule:

Step 1 Select Access Policies > Service Selection Policy > service > policy, where service is the name of the access service, and policy is the type of policy.

The Policy page appears with a list of configured rules.

Step 2 Check the check box next to the rule that you want to duplicate. You cannot duplicate the Default Rule. Step 3 Click Duplicate.

The Rule page appears.

Step 4 Change the name of the rule and complete the other applicable field options.

Step 5 Click OK.

The Policy page appears with the new rule.

Step 6 Click Save Changes to save the new rule.

Step 7 Click Discard Changes to cancel the duplicate rule.

Related Topics

•Creating Policy Rules, page 10-37

•Editing Policy Rules, page 10-38

•Deleting Policy Rules, page 10-39

Editing Policy Rules

You can edit all values of policy rules; you can also edit the result in the Default rule.

To edit a rule:

Step 1 Select Access Policies > Service Selection Policy > service > policy, where service is the name of the access service, and policy is the type of policy.

The Policy page appears, with a list of configured rules.

Step 2 Click the rule name that you want to modify; or, check the check box for the Name and click Edit. The Rule page appears.

Step 3 Edit the appropriate values.

	User Guide for Cisco Secure Access Control System 5.3
10-38	OL-24201-01